Tiny Eglit’s SUPER SALE

[dinoKeymaster]

A BUNCH:
HEY GUYS SELLING SOME STUFF PLEASE READ AND SEE WHAT YOU CAN DO, IF YOU DONT SEE SOMETING ASK, PLEASE PASS IT ON, I KNOW MONEY IS TIGHT, I THINK THE PRICES ARE FAIR,BUT I WILL TALK IF SOMEBODY IS INTERESTED IN ANYTHING, AND TONY YOU’D LOOK GOOD IN THAT MOTORHOME.
THANKS
TINY………………..contact: Outslaw2@aol.com
* NEW G&C PRO TRANS GLIDE BUILT TO HOLD OVER 2,200 HP, NEVER EVEN BEEN IN A CAR, COST ME $5,500 ASKING $4,500.
* 38 FOOT MOTORHOME 2000 HOLIDAY RAMBLER,ENDEAVOR, 1 SLIDE OUT, AUTO LEVELER, 22,00 MILE V-10 TRITON, MINT CONDITION, PAID $50,000 ASKING $39,000 I OWE $28,000 SO IF SOMEBODY GAVE ME $10,000 AND TAKE OVER PAYMENTS THRU BANK OF AMERICA $286.00 MO.

*ALSO GOT A OLD 55 CHEVY GASSER,GLASS NOSE, HAVE GLASS DOORS AND TRUNK BUT STEEL IS GOOD I’LL THROW IN,BODY WAS OFF FRAME PAINTED BLACK, STOCK SUSPENSION,9″ REAR,4.10 POSI, ALSO GOT A ECONOLINE STRAIGHT AXLE DRUM-DRUM,COMPLETE,BLASTED AND PAINTED, ALL GLASS GOOD,WITH REGGY, REBUILT 396 ROLLER MOTOR,HOOKER FENDER WELL HEADERS, LAKEWOOD BELL HOUSING FOR 55-57 CHEVYS, REBUILT M-20,TUNNEL RAM W/2 660 CENTER SQUIRTERS, R&P REAR SEATHEADS GOT TO BE PUT ON,AND INSTALLED,REAR WHEELWELLS WERE MOVED UP LITTLE RUST IN TRUNK AND DRIVER SIDE FLOOR THATS IT, I HAVE A NEW STOCK FLOOR PANEL TO CUT A LIL PIECE OUT FOR FLOOR, I WAS GOING TO BUILD A NOSTAGLIA AXLE GASSER HAS A COUPLE OF WIN STICKERS FROM LONG ISLAND NEEDS TO BE ASSEMBLED ASKING $14,500
* ALL SIZE ALUM CENTERLINES,REAR WHEELS,WIDTHS,OFF SETS ,SLICKS, FRONT WHEELS,
*EARLY CENTERLINE FUNNY CAR ANGLIA SPINDEL MTS MINT $700.
*4 HOT ROD DIRECTIONAL MAGS W/ NEW TIRES WIDER ON REAR $500
*2 NEW HOOSIER WIDEST PRO STREET TIRES MADE $500 COST $700
* BBC 14-71 MOONEYHAM BLOWER MANIFOLD FOR STD DECK $350,
*BBC NOSTALGIA WIEAND BLOWER MANIFOLD WITH SPRING POP OFF ON FRONT $300,
*BBC ALTERED STEPPED HEADERS $250,
*85 GMC 3/4 TON SUBURBAN,350/400 410 REAR,MAGS LIL OVER 100 K IT HAS TOW PACKAGE SO I THINK THE MOTOR IS A 4 BOLT, BIGGER COOLERS,TILT ALL OPTIONS,PLASTIC ON 2nd & 3rd SEAT SINCE NEW,I’M 2nd OWNER SOME RUST SO RATHER SELL FOR PARTS,$700 BEEN SITTEN FOR 5 YRS, BUT RAN WHEN PARKED.
* 31 SPLINE SPOOL 4:30 GEAR STOCK HOUSEING ALSO NARROWED 31 SPLINE MOSER AXLES AND EMPTY HOUSING TO CUT $600 [PROBABLY FOR A 55 PRO STREET I THINK ]
*2 OVER DRIVE UNITS FOR TOW VEHICLE 1 NEW $650 1 USED $550,
*4- NEW TRAILER ALARMS SYSTEMS, $400 ea [ I WAS A DEALER FOR THEM ],
*ENDERLE HAT ON A TUNNEL RAM FOR BBC $ 950,
***MIKE DUNNS “SNICKERS” DAYTONA FUNNY CAR BODY CUT IN 1/2 LENGHT WISE FOR WALL HANGER,I WAS TOLD IT COULD BE PUT TOGETHER IT’S CARBON FIBER NO MATERIAL MISSING $2,500
*DUEL AXLE NOSTALGIA OPEN DRAGTER TRAILER $800
*ASSORTED HOLLEY CARBS,
* 4 -60’s RALLYE WHEELS WITH CAPS & RINGS,2- 6 or 7 in. & 2-8 in.WITH TIRES,$400,
*4-ORIGINAL TORQ THRUSTS CHEVY 2-6in & 2 8 or 10 in WITH GOOD TIRES,$450
*MOROSO MECH TACH WITH CABLE & MT. $100,
* SOME GOOD USED 9″ GEARS SETS, SBC 6″ ALUM RODS SBC 2 RUNS $400,
*454 BBC ALUM RODS 22 RUNS $450,
*CROWER SBC CRANK $500, STOCK STEEL 427 CRANK $ 375,
*BELT DRIVE FOR FUEL INJECTION PUMP CHEVY,
*1./2 BLOWER PULLEYS $50 ea
>>>>>JR DRAGSTER,NEVER RACED,5hp B&S MOTOR,CHROME MOLLEY CHASSIS,WING,ELECTRIC STARTER ,PAINTED PLUM CRAZY FRAME AND WHITE BODY NO LETTERING,CAN FIT TALLL KID ADJ PEDELS PAID $5,500 WANT $ 3,500.

[Author]

Posts