Valley performance Specialties

Forums Forums SPEED SHOPS from Dover’s past Valley performance Specialties

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #10576
    pauln

        My friend Pat ran this speed shop in Fishkill in the mid 70’s. From time to time I would help him out and I recall one night a fellow came in with an M-21 four speed that he had attempted to install the Mr.Gasket syncro rings. The tranny was all in pieces and he was at wits end. I enjoyed doing trannies, (learning the hard way), and together we reassembled it. He told me he had a friend that was having some tranny problems with noise. So he brings in an almost new M-22 Crash Box tranny. i explain to him that the noice isue was indicative of the design. He calls me at home a few weeks later and says he bought a T-10 to replace it and if I wanted he would give me the old one. So I got a new M-22 for nothing. It was the only piece of equipment on any of my cars that didn’t self destruct.

        #27621
        mikey

            Hi Paul, it’s Mikey. Do you remember me? I bought those tow hubs from you way back when, and then bought your Red Chevelle, 68 or 69, can’t remember. I went out to see Barry Ortiz with you once for something you were getting from him.
            Mikey(Mike) McDermott 😆

            #27625
            dino
            Keymaster

                Paul….Already Here:
                http://www.doverdragstrip.com/phpBB3/viewtopic.php?f=48&t=1153&st=0&sk=t&sd=a&hilit=fiend

                ………….Scroll down to bottom right of page of ANY heading and see the little Page Boxes …Speed Shops has THREE pages…this was on page 2

              Viewing 3 posts - 1 through 3 (of 3 total)
              • You must be logged in to reply to this topic.