LETS HEAR ABOUT YOUR LATEST – Dover Drag Strip

This topic has 25 replies, 12 voices, and was last updated January 8, 2018 at 5:02 pm by realmongo.

Viewing 15 posts - 1 through 15 (of 26 total)

1 2 →

Author

Posts
September 27, 2008 at 5:12 pm #8805
dino
Keymaster
This is where we get the poop on your NOW STUFF…Racing, Roddin, Street Perf.Ride, Working on a new project ,on a Crew still or help out a team? Might not even be race car related ,could be a job, hobby or new interest.

POST AS NEW TOPIC not reply to this .
November 18, 2008 at 2:10 am #13768
7sec-cuda
we run the naturally aspirated events on the east coast and mostly at englishtown new jersey
November 27, 2008 at 11:46 pm #13979
masracingtd1167
Participant
May 26, 2010 at 9:45 pm #25217
patina
Participant
Brother Mike comes through again and puts the new brakes on the MG. We have a good pedal now and we will see what happens after we start the car and apply the line lock. I think I’ll give brother a raise (lifts inside his shoes) Next we will be putting the Hilborn back on.

Pat
March 22, 2012 at 9:31 pm #33540
john-sachs-sr
Participant
Another year running PXM at the ADRL races. 😎
Tuff year last year, Kim finished #3, less than a round out of earning the #2 plate. Won her first round at the World Finals, but broke the motor doing it. Spare was just as bad.
John
Go to ADRL US, after it loads, click on agent 660. Scroll down to the third article.
March 25, 2012 at 2:50 pm #33586
masracingtd1167
Participant
Working on my stuff today . Heads are ready to go on
March 25, 2012 at 2:53 pm #33587
masracingtd1167
Participant
Lot’s of air in and lot’s of air out
March 26, 2012 at 12:54 am #33615
dino
Keymaster
Is that where the term “AirHead” came from…….Sorry couldn’t resist
March 26, 2012 at 12:59 pm #33616
babycakes
Participant
Billy….any ‘radical’ changes this year in the ‘go’ dept…or just ‘freshening up your power plant? 🙄 ❓
March 26, 2012 at 6:38 pm #33618
masracingtd1167
Participant
No big changes for this year .Just a fresh hone job and took a little duration out of the cam.
March 26, 2012 at 11:14 pm #33619
mikey
Very nice. I hope mine look like that!!! ……Mikey 😆
April 1, 2012 at 4:13 pm #33670
masracingtd1167
Participant
Motor is almost finished . Shoutl be back in the car next week
April 1, 2012 at 4:19 pm #33671
masracingtd1167
Participant
April 1, 2012 at 6:02 pm #33675
babycakes
Participant
Very ‘NICE’ Billy,bet you can’t wait to tear up the strip once again!!!! 😀 😀 😀 😀
April 1, 2012 at 9:04 pm #33682
tomblake
Participant
Billy…..Who makes the cam driven distributor? Looks like a good solution to my under the windshield hard to get to distributor problem.
Author

Posts

Viewing 15 posts - 1 through 15 (of 26 total)

1 2 →

You must be logged in to reply to this topic.